PENGUJIAN AKARAKTERISTIK PASIR PANTAI KABUPATEN KOLAKA SEBAGAI MATERIAL ALTERNATIF PEMBUATAN BETON (Pasir Pantai Kec. Tanggetada, Kec. Watubangga dan Kec. Toari)

  • Muhammad Buttomi Masgode Universitas Sembilanbelas November Kolaka
  • Bagus Eko Prasetyo Universitas Sembilanbelas November Kolaka
  • Arman Hidayat Universitas Sembilanbelas November Kolaka
  • Rustan Rahman Rustan Universitas Sembilanbelas November Kolaka
  • Basri Basri Universitas Sembilanbelas November Kolaka
Keywords: Beach Sand, Characteristic Test, Kolaka

Abstract

The quality characteristics of the concrete produced are greatly influenced by the quality of the fine aggregate used as a structural component, because fine aggregate has a large influence on the volume of concrete. So, the use of beach sand as a construction material must meet the specified requirements. The aim of this research is to determine the characteristics of beach sand in 3 (three) sub-districts in Kolaka district, whether it can be used in making concrete or not. The research method used was a detailed experiment carried out at the Concrete Laboratory of Sembilanbelas November University Kolaka with samples of Tanggetada Beach Sand, Watubangga Beach Sand and Toari Beach Sand. The results of testing the characteristics of the three beach sands used were obtained by testing data that met the requirements specified in SNI 03-1971-1990, except for the sieve analysis examination at No. 50 for all sand locations and No. 100 for Tanggetada and Toari Beach sand locations. Meanwhile, the specific gravity and water absorption, bulk weight, water content and passing sieve No. 200 have met the specifications. From the results obtained, the use of Watubangga Beach Sand can be used as sand material for normal concrete construction.

References

Anonim, (1997). Peraturan Beton Bertulang Indonesia 1971. Departemen Pekerjaan Umum. Yayasan Lpmb: Bandung.
ASTM C117: 2012 Tentang Pengujian Bahan Dalam Agregat Yang Lolos Saringan No. 200.
ASTM C136: 2012 Tentang Pengujian Analisa Saringan Agregat Halus Dan Agregat Kasar.
Badan Standarisasi Nasional, (1998). SK SNI 03-4804-1998 (Tentang Pengujian Bobot Isi Dan Rongga Udara Agregat Halus Dan Agregat Kasar). Bsn: Jakarta.
Badan Standarisasi Nasional, (2000). SNI 03-2834-2000, (Tata Cara Pembuatan Rencana Campuran Beton Normal). Bsn: Jakarta.
Badan Standarisasi Nasional, (2002). SNI 03–2847-2002, (Tata Cara Perhitungan Struktur Beton. Untuk Bangunan Gedung). Bsn: Jakarta.
Badan Standarisasi Nasional, (2008). SNI 1970: 2008 (Tentang Cara Uji Berat Jenis Dan Penyerapan Air Agregat Halus). BSN: Jakarta.
Badan Standarisasi Nasional, (2014). SNI 2816: 2014 (tentang tata cara pengujian bahan organic dalam agregat halus). BSN: Jakarta.
Badan Standarisasi Nasional, (2011). SNI 03-1971-2011 (Tentang Pengujian Kadar Air Agregat Halus). BSN: Jakarta.
Masgode, M.B.dan Imran. (2021). Analisis Kuat Tekan Beton Normal Dengan Menggunakan Pasir Sungai Ulu Lapo-Pao. Jurnal DINTEK, Vol. 14, No, 2, 01 September 2021.
Tata, A., Irnawaty dan Cavaruddin. (2018). Studi Karakteristik Agregat Pasir Pantai Mangoli, Sosowomo dan Loto Dalam Komposisi Beton. Techno: Jurnal Penelitian, Vol. 6, No. 2, 02 Oktober 2017.
Published
2024-05-17
How to Cite
Masgode, M., Prasetyo, B., Hidayat, A., Rustan, R., & Basri, B. (2024). PENGUJIAN AKARAKTERISTIK PASIR PANTAI KABUPATEN KOLAKA SEBAGAI MATERIAL ALTERNATIF PEMBUATAN BETON (Pasir Pantai Kec. Tanggetada, Kec. Watubangga dan Kec. Toari). Journal of Sustainable Civil Engineering (JOSCE), 6(01), 34-43. https://doi.org/10.47080/josce.v6i01.3262