ANALISIS KUALITAS PRODUK WIRING HARNESS MENGGUNAKAN METODE QUALITY CONTROL CIRCLE (QCC) DAN 5W+1H DI PT EDS MANUFACTURING INDONESIA
Abstract
PT EDS Manufacturing Indonesia is dedicated to providing high quality products to its customers. The quality control system implemented ensures that the company does not to: Accept defective products, Manufacture defective products, and Pass defective products. In the January-November 2022 period, there was an increase in defects with an average of 2.2%, which previously in 2021 was only at 1.7%. In order for the products produced to be in accordance with consumer expectations, the company must take effective quality measures made and avoid the large number of damaged or defective products supplied to the market. Quality Control Circle (QCC) is a form of emphasis instrument commonly used in many companies to manage and improve product quality using the PDCA (Plan, Do, Check, Action) cycle. The types of defects that often occur in the production of wirring harness (Suzuki) in the January-November 2022 period are: not click connector defects of 1486, not click docking connector of 726 and missing spot of 473. Known factors that cause the occurrence of not click connectors are: human factors, method factors, and environmental factors. Factors that cause not click docking connectors are: human factors, method factors, and machine factors. The factors causing the missing spot are: human factors and method factors. After the improvement, there was a decrease in the disability rate from the previous condition by an average of 2.2%, to 1.4%. At the stage that has been done, to get sustainable results and continue to control the quality of the products produced, the improvements made need to be made a standard. The standardization is made in the form of SOPs and must be applied to all related elements.
References
Afdal, n. (2020). Tinjauan pengendalian kualitas produk pada cv. Morteza prima teknik.
Attaqwa, y., saputra, w. S., & khamal, a. M. (2021). Kerem quality control using the quality control circle ( qcc ) method at pt . Xyz. 02(03), 98–104.
Bakhtiar, s., tahir, s., & hasni, r. A. (2013). Analisa pengendalian kualitas dengan menggunakan metode statistical quality control (sqc). Malikussaleh industrial engineering journal, 2(1), 29–36. Https://103.107.186.27/miej/article/viewfile/26/17%0ahttps://www.mendeley.com/catalogue/090dd3e8-7ab9-3d9d-a098-98a8f093fd2a/?utm_source=desktop&utm_medium=1.19.8&utm_campaign=ope
Damayant, k., fajri, m., & adriana, n. (2022). Pengendalian kualitas di mabel pt . Jaya abadi dengan menggunakan metode seven tools. 3(1), 1–6.
Fajaranie, a. S., & khairi, a. N. (2022). Menggunakan peta kendali dan diagram fishbone di perusahaan produsen mie kering semarang , jawa tengah. 7(1), 7–13.
Hamdani, h., wahyudin, w., gemilang putra, c. G., & subangkit, b. (2021). Analisis pengendalian kualitas produk 4l45w 21.5 my menggunakan seven tools dan kaizen. Go-integratif : jurnal teknik sistem dan industri, 2(02), 112–123. Https://doi.org/10.35261/gijtsi.v2i2.5651
Haryadi. (2018). Analisa pengendalian kualitas untuk mengurangi jumlah cacat produk dari proses cutting dengan metode quality control circle (qcc) pada pt. Toyota boshoku indonesia (tbina). Program studi teknik industri universitas mercu buana, 1–66.
Hasanah, h. (2016). Teknik-teknik observasi. Jurnal at-taqaddum, 21–46.
Ilham, m. N. (2012). Analisis pengendalian kualitas produk dengan menggunakan statistical processing control ( spc ) pada pt . Bosowa media grafika ( tribun timur ).
Kartika, h. (2013). Analisis pengendalian kualitas produk cpe film dengan metode statistical process control pada pt . Msi. Jurnal ilmiah teknik industri, 1(1), 50–58.
Kristian adi nugraha, h. (2021). Klasifikasi pertanyaan bidang akademik berdasarkan 5w1h menggunakan k-nearest neighbors. Jurnal edukasi dan penelitian informatika (jepin), 7(1), 44. Https://doi.org/10.26418/jp.v7i1.45322
Matondang, t. P., & ulkhaq, m. M. (2018). Aplikasi seven tools untuk mengurangi cacat produk white body pada mesin roller. 2(2), 59–66.
Mita, g., sulaeman, r., & gusniar, i. N. (2023). Analisis pengendalian kualitas menggunakan metode quality control circle pada part jk6000 di pt . Xyz. Viii(2), 5029–5036.
Nurcahyo, r., irhamna, o., & dachyar, m. (2018). Effectiveness of quality control circle on construction company performance in indonesia *. November. Https://doi.org/10.1109/icetas.2018.8629264
Perwira, e. A., suseno, a., & fitriani, r. (2021). Pengendalian mutu part accu 12v dan kaca anti peluru kendaraan komodo nexter dengan metode qcc pada divisi qa dan k3lh kendaraan khusus. Jurnal teknik industri: jurnal hasil penelitian dan karya ilmiah dalam bidang teknik industri, 7(1), 54. Https://doi.org/10.24014/jti.v7i1.11118
Prakoso, s., & putra, y. A. (2021). Pengendalian kualitas twisted cable dengan metode seven tools dan quality controlcircle (qcc) di pt voksel electric tbk. Jupiter: journal of computer & information technology, 2(2), 78–95. Https://doi.org/10.53990/cist.v2i2.138
Rahardjo, m. (2011). Metode pengumpulan data penelitian kualitatif. 1–4.
Ratnadi, r., & suprianto, e. (2016). Pengendalian kualitas produksi menggunakan alat bantu statistik (seven tools) dalam upaya menekan tingkat kerusakan produk. Jurnal indept, 6(2), 11. Https://jurnal.unnur.ac.id/index.php/indept/article/view/178/0
Ridwan, a., ulfah, m., sonda, a., & arya, v. (2022). Pengendalian kualitas produksi roti menggunakan quality control circle. Journal industrial servicess, 7(2), 314. Https://doi.org/10.36055/jiss.v7i2.14159
Rumondor, e. M., sambiran, s., & kimbal, a. (2020). Kualitas pelayanan satuan polisi pamong praja dalam penertiban aset pemerintah daerah provinsi sulawesi utara. 2(5), 1–12.
Setiawan, b., & soediantono, d. (2022). Benefits of quality control circle ( qcc ) and proposed applications in the defense industry : a literature review manfaat quality control circle ( qcc ) dan usulan penerapan pada industri pertahanan : a literature review. 3(4), 13–22.
Sihombing, m. I., & sumartini. (2017). Pengaruh pengendalian kualitas bahan baku dan pengendalian kualitas proses produksi terhadap kuantitas produk cacat dan dampaknya pada biaya kualitas ( cost of quality ). 8(2), 34–41.
Subana, m., sahrupi, s., & supriyadi, s. (2021). Analisis pengendalian kualitas produk coil dengan pendekatan metode six sigma. Jitekh, 9(1), 46–51. Https://doi.org/10.35447/jitekh.v9i1.333
Suharyanto, herlina, r. L., & mulyana, a. (2022). Analisis pengendalian kualitas produk waring dengan metode seven tools di cv . Kas sumedang. 16(1), 37–49.
Supardi, s., & dharmanto, a. (2020). Analisis statistical quality control pada pengendalian kualitas produk kuliner ayam geprek di bfc kota bekasi. Jimfe (jurnal ilmiah manajemen fakultas ekonomi), 6(2), inpress. Https://doi.org/10.34203/jimfe.v6i2.2622
Syahrullah, y., & izza, m. R. (2021). Integrasi fmea dalam penerapan quality control circle (qcc) untuk perbaikan kualitas proses produksi pada mesin tenun rapier. Jurnal rekayasa sistem industri, 6(2), 78–85. Https://doi.org/10.33884/jrsi.v6i2.2503
Wardah, s., amin, m., safitri, a., & sudeska, m. G. M. E. (n.d.). Model pengendalian kualitas gula kelapa dengan menggunakan metode seven tools ( studi kasus : ikm gula kelapa desa bagan jaya kecamatan enok ). 187–195.
Wisnubroto, p., yusuf, m., & prayitno. (2019). Pengendalian kualitas produk cacat menggunakan pendekatan gugus kendali mutu dengan seven tools pada ud. Kalor makmur. Iejst journal, vol. 3(1), hal. 34-42.
Yunitasari, e. W., & nina putri wardana, f. S. W. (2021). Pengendalian kualitas produk vitabumin 130 ml menggunakan statistical quality control (sqc) di pt. Aksamala adi andana 1. 1, 1–10.
Copyright (c) 2023 wawan gunawan
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
