BEBAN KERJA PSIKOLOGIS DAN FISIK DENGAN NASA-TLX DAN CARDIOVASCULAR LOAD (CVL)
Abstract
The unsafe behavior of workers causing work injuries and accidents is an important concern of the world so it is embraced by psychological and physical work measurements. The study aims to analyze the psychological and physical workload of employees in the quality control (QC) division, psychological workload measured by the National Aeronautics and Space Administration Task Load Index (NASA-TLX) method, and physical workload based on the percentage of Cardiovascular Load (% CVL) of 15 employees in the QC division. The research step was carried out by measuring psychological workload based on 5 aspects, namely: Psychological demand (MD), Physical Demand (PD), Own Performance (OP), Effort (EF) and Frustration Level (FR), weighting, rating and calculating the Weighted Workload (WWL) Value, determining the average WWL and interpretation based on the physical workload score value with CVL. Physical workload measurement is carried out by calculating the maximum pulse rate based on the pulse rate at work (DNK) and pulse rate at rest (DNI) to determine the percentage value of CVL. The results of the psychological workload score study using the NASA-TLX method, that 2 employees (13.33%) were in a low category while 11 employees (73.33%) were in the medium category, and 2 employees (13.33%) in the high category, proposed improvements with the addition of employees to reduce the psychological workload. The physical workload score value using the CVL method is less than 30% so the physical workload of employees is categorized as "No Fatigue" so that there is no improvement to reduce the physical workload or quality control division employees do not experience physical workload. The scale of the data with a larger population is recommended to be tested in future studies.
References
Abdelzaher, A. A., & Kharbeche, M. (2022). Model for for Workload in a Stress in in a a Production. IFAC PapersOnLine, 55(10), 2005–2010. https://doi.org/10.1016/j.ifacol.2022.10.002
Abukhashabah, E. et al. (2020). Occupational accidents and injuries in construction industry in Jeddah city. Saudi Journal of Biological Sciences, 27(8), 1993–1998. https://doi.org/10.1016/j.sjbs.2020.06.033
Ahmad, Y. et al. (2019). Pengaruh Stres Kerja, Beban Kerja, Dan Lingkungan Kerja Terhadap Kinerja Karyawan Pada Pt. Fif Group Manado the Effect of Work Stress, Workload, and Work Environment on Employee Performance At PT. FIF Group Manado. Jurnal EMBA: Jurnal Riset Ekonomi, Manajemen, Bisnis Dan Akuntansi, 7(3), 2303–1174.
Amir, J. et al. (2019). Hubungan Kebisingan, Kelelahan Kerja dan Beban Kerja Pada Pekerja Bagian Body Rangka PT. X. E-Jurnal Pustaka Kesehatan, 7, 345–350.
Arasyandi, M., & Bakhtiar, A. (2016). Analisa Beban Kerja Mental Dengan Metode NASA TLX Pada Operator Kargo di PT. Dharma Bandar Mandala (PT. DBM). Industrial Engineering Online Journal, 5(4), 1–6.
Baber, C., & Young, M. S. (2022). Making ergonomics accountable: Reliability, validity and utility in ergonomics methods. Applied Ergonomics, 98(April 2021), 103583. https://doi.org/10.1016/j.apergo.2021.103583
Diniaty, D., & Muliyadi, Z. (2016). Analisis Beban Kerja Fisik Dan Mental Karyawan Lantai Produksi Dipt Pesona Laut Kuning. Jurnal Sains, Teknologi, Dan Industri, 13(2), 203–210.
Drouot, M. et al. (2022). Augmented reality on industrial assembly line: Impact on effectiveness and mental workload. Applied Ergonomics, 103(September 2021), 103793. https://doi.org/10.1016/j.apergo.2022.103793
Eiselt, H. A., & Marianov, V. (2008). Employee positioning and workload allocation. Computers and Operations Research, 35(2), 513–524. https://doi.org/10.1016/j.cor.2006.03.014
Fahamsyah, D. (2017). ANALISIS HUBUNGAN BEBAN KERJA MENTAL DENGAN STRES KERJA DI INSTALASI CSSD RUMAH SAKIT UMUM HAJI SURABAYA. The Indonesian Journal of Occupational Safety and Health, 6(1), 107–115. https://doi.org/10.20473/ijosh.v6i1.2017.107-115
Fruggiero, F. et al. (2018). Revealing a frame to incorporate safe human behaviour in assembly processes. IFAC-PapersOnLine, 51(11), 661–668. https://doi.org/10.1016/j.ifacol.2018.08.394
Goncalves Filho, A. P. et al. (2021). Improving accident analysis in construction – Development of a contributing factor classification framework and evaluation of its validity and reliability. Safety Science, 140(April), 105303. https://doi.org/10.1016/j.ssci.2021.105303
Halsey, L. G. et al. (2022). Variability in energy expenditure is much greater in males than females. Journal of Human Evolution, 171. https://doi.org/10.1016/j.jhevol.2022.103229
Handoko et al. (2020). An Analysis of the Impact of Workload towards the Risk of Fatigue Level on PT KCI Machinists. International Journal of Multicultural and Multireligious Understanding, 7(10), 70–78.
Heinrich, H. W. (1941). Industrial Accident Prevention. A Scientific Approach.e.
Henni et al. (2014). Analisis Pengaruh Shift Kerja Terhadap Beban Kerja Mental Pekerja dengan Menggunakan Metode SWAT (Subjective Workload-Assessment Technique). Jurnal Integrasi Sistem Industri UMJ, 1(2), 75–82. https://jurnal.umj.ac.id/index.php/jisi/article/view/936
ILO-Safety and health at work. (n.d.).
Jame Chenarboo, F. et al. (2022). The influence of physical and mental workload on the safe behavior of employees in the automobile industry. Heliyon, 8(10), e11034. https://doi.org/10.1016/j.heliyon.2022.e11034
Jeffri, N. F. S., & Awang Rambli, D. R. (2021). A review of augmented reality systems and their effects on mental workload and task performance. Heliyon, 7(3), e06277. https://doi.org/10.1016/j.heliyon.2021.e06277
Kantowitz, B. H., & Casper, P. A. (2017). Human workload in aviation. In Human error in aviation (pp. 123–153). Routledge.
Khanzode, V. V. et al. (2012). Occupational injury and accident research: A comprehensive review. Safety Science, 50(5), 1355–1367. https://doi.org/10.1016/j.ssci.2011.12.015
Kramer, A. F. (2020). Physiological metrics of mental workload: A review of recent progress. Multiple-Task Performance, 279–328. https://doi.org/10.1201/9781003069447-14
Krisnaningsih, E. et al. (2019). Pengukuran Beban Kerja Mental Operator Control Room Menggunakan Metode Subjective Workload Assesment Technique (SWAT) di PT. Krakatau Steel (Persero) TBK. Jurnal Teknik Industri, 2(1), 32–44.
Krisnaningsih, E. et al. (2020). Usulan Penentuan Waktu Baku Pada Operator Packing Folding Kain Tetoron Rayon Dengan Metode Stopwacth. Jurnal InTent, 3(2), 67–81.
Krisnaningsih, E. et al. (2022). ANALISA MULTI-CRITERIA PEMILIHAN PEMASOK BAJA SLAB. 5(1), 1–13.
Li, W. C. et al. (2022). The influence of augmented reality interaction design on Pilot’s perceived workload and situation awareness. International Journal of Industrial Ergonomics, 92(May), 103382. https://doi.org/10.1016/j.ergon.2022.103382
Liao, C. W., & Chiang, T. L. (2022). Occupational injuries among non-standard workers in the Taiwan construction industry. Journal of Safety Research, 82, 301–313. https://doi.org/10.1016/j.jsr.2022.06.006
Lin, J. H. et al. (2022). Safety, health, and ergonomics in cleaning occupations. Applied Ergonomics, 106, 103914. https://doi.org/10.1016/j.apergo.2022.103914
Mosaly, P. R. et al. (2021). Impact of Workspace Design on Radiation Therapist Technicians’ Physical Stressors, Mental Workload, Situation Awareness, and Performance. Practical Radiation Oncology, 11(1), e3–e10. https://doi.org/10.1016/j.prro.2020.07.002
Mushabe, C. et al. (2022). Reconceptualizing faculty workload as a measure of human resource motivation and performance in higher education. Social Sciences & Humanities Open, 6(1), 100279. https://doi.org/10.1016/j.ssaho.2022.100279
Oah, S. et al. (2018). The Influence of Safety Climate, Safety Leadership, Workload, and Accident Experiences on Risk Perception: A Study of Korean Manufacturing Workers. Safety and Health at Work, 9(4), 427–433. https://doi.org/10.1016/j.shaw.2018.01.008
Poó, F. M. et al. (2018). The taxi industry: working conditions and health of drivers, a literature review. Transport Reviews, 38(3), 394–411. https://doi.org/10.1080/01441647.2017.1370035
Ramaganesh, M. et al. (2021). Ergonomics hazard analysis techniques- A technical review. Materials Today: Proceedings, 46(xxxx), 7789–7797. https://doi.org/10.1016/j.matpr.2021.02.329
Ramdan, I. M., & Rahman, A. (2018). Analisis Risiko Kesehatan dan Keselamatan Kerja (K3) pada Perawat. Jurnal Keperawatan Padjadjaran, 5(3), 229–241. https://doi.org/10.24198/jkp.v5i3.645
Romero Barriuso, A. et al. (2021). The importance of preventive training actions for the reduction of workplace accidents within the Spanish construction sector. Safety Science, 134(November 2020). https://doi.org/10.1016/j.ssci.2020.105090
Schwartz, A. et al. (2021). Janitors’ mental workload, psychosocial factors, physical fitness, and injury: The SWEEP study. International Journal of Industrial Ergonomics, 83(March), 103132. https://doi.org/10.1016/j.ergon.2021.103132
Sutalaksana, I. Z. et al. (1979). Teknik Tata Cara Kerja, Bandung. Penerbit Departemen Teknik Industri–ITB.
van der Kleij, R. et al. (2018). Change detection support for supervisory controllers of highly automated systems: Effects on performance, mental workload, and recovery of situation awareness following interruptions. International Journal of Industrial Ergonomics, 66, 75–84. https://doi.org/10.1016/j.ergon.2018.02.010
Vanberkel, P. T. et al. (2011). An exact approach for relating recovering surgical patient workload to the master surgical schedule. Journal of the Operational Research Society, 62(10), 1851–1860. https://doi.org/10.1057/jors.2010.141
Wilson, M. D. et al. (2021). Understanding fatigue in a naval submarine: Applying biomathematical models and workload measurement in an intensive longitudinal design. Applied Ergonomics, 94(March), 103412. https://doi.org/10.1016/j.apergo.2021.103412
Yang, Y. et al. (2020). Effect of highway directional signs on driver mental workload and behavior using eye movement and brain wave. Accident Analysis and Prevention, 146(July), 105705. https://doi.org/10.1016/j.aap.2020.105705
