PENGENDALIAN PERSEDIAAN GAS LPG DI PT. ANUGRAH GAS UTAMA DENGAN MENGGUNAKAN METODE PERIOD ORDER QUANTITY DAN JUST IN TIMEETODE PERIOD ORDER QUANTITY DAN JUST IN TIME
DOI:
https://doi.org/10.47080/9bbbp437Keywords:
Inventory, Period Order Quantity , Just in Time (JIT), The LPG Bulk Filling and Transportation StationAbstract
PT. Anugrah Gas Utama is a company that cooperates with Pertamina or commonly called the LPG Bulk Filling and Transportation Station (SPPBE) which is engaged in oil and gas or oil and gas which produces 3 kg of gas. In the implementation of production, PT. Anugrah Gas Utama requires raw material inventory control from time to time to ensure a smooth production process, with the raw material control system implemented in the company, the inventory costs can be reduced as little as possible. The purpose of this study was to determine the optimal number of orders for raw materials and to minimize total inventory costs. Based on the research results obtained by using the Period Order Quantity (POQ) and Just In Time (JIT) methods, it can be seen that the lowest total cost is by using JIT which is Rp.31,674,517 while using the POQ method is Rp.212,331. 595. Because the JIT method has a lower total cost than the POQ method, the Just In Time (JIT) method can be used by companies. But the company must reduce its inventory and build strong relationships with suppliers and customers.
References
Azwan, F., & Norawati, S. (2019). Analisis Pengendalian Persediaan Bahan Baku Dengan Menggunakan Metode Period Order Quantity (POQ) Pada Usaha Roti Kampar Bakery. 1(1), 1–5.
Badi’ah, R., Odelia, E. M., & Syauqi, A. (2022). Proses Perencanaan dan Pengendalian Persediaan Bahan Baku Produk Chicken Nugget. EKOMBIS REVIEW: Jurnal Ilmiah Ekonomi Dan Bisnis, 10(S1), 47–58. https://doi.org/10.37676/ekombis.v10is1.1984
Careza Rizky, Yuli Sudarso, S. E. S. (2016). Analisis Perbandingan Metode EOQ dan Metode POQ Dengan Metode Min-Max Dalam Pengendalian Persediaan Bahan Baku Pada PT Sidomuncul Pupuk Nusantara. Admisi Dan Bisnis, 17 No 1(ISSN 1411 – 4321), 11–22.
Efrianti, D. (2014). Pengaruh Pengendalian Persediaan Just In Time Terhadap Efisiensi Pengadaan Persediaan Bahan Baku Studi Kasus Pada Cv Jawara Karsa Agusto. 2(1).
Rachmawati, S. A., Syafirullah, L., & Faiz, M. N. (2020). Perancangan Sistem Pengendalian Persediaan Barang Menggunakan Metode EOQ Dan Rop Berbasis Web. Seminar Nasional Terapan Riset Inovatif (SENTRINOV) Ke-6, 6(1), 778–786.
Raihananda, M., Yuwono, A., & Saptadi. (n.d.). Min-Max Dalam Pengendalian Persediaan Komponen Pesawat Terbang Boeing 737ng ( Studi Kasus : PT Garuda Maintenance Facility Aeroasia Tbk .).
Rina, S. A., & D, D. R. H. (2021). Analisis Implementasi Sistem Just In Time (Jit) Pada Persediaan Bahan Baku Untuk Memenuhi Kebutuhan Produksi Pada Zidane Meubel Palangka Raya. 2(1), 64–72.
Sari, S., & Saputro, A. P. (2022). Pengendalian Persediaan Welding Gas Arcal-21 dengan Metode EOQ dan Min-Max pada PT. Beton Perkasa Wijaksana. Jurnal Pendidikan Dan Aplikasi Industri, 9(1), 28–36.
Sigit, A. (2016). Studi Komparasi Metode EOQ Dan POQ Dalam Usaha Efisiensi Biaya Bahan Pasir Paving Block. Teknisia, 21(1), 209–217. https://journal.uii.ac.id/teknisia/article/view/7224
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Achmad Syarifudin

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.