ANALISA KERUSAKAN MESIN CNC VERTICAL TURNING LATHE DENGAN MENGGUNAKAN METODE FAILURE MODE AND EFFECT ANALYSIS
DOI:
https://doi.org/10.47080/saintek.v4i2.998Keywords:
: Failure Mode and Effect Analysis, availability, risk priority numberAbstract
PT X is a manufacturing company that produces high-precision components, using 13 units of CNC machines as production tools. The target of achieving technical availability for each machine unit is at least 85% in one year. One of the machine units, namely the CNC vertical turning lathe machine in this company, was only able to reach 64% of the technical availability value due to the impact of the damage. This study aims to determine the causes of component failure in machine units that have low technical availability, namely the CNC vertical turning lathe, using the Failure Mode and Effect Analysis method. The results showed that during one year, the CNC vertical turning lathe was damaged 19 times, on 7 different machine components. With the results of data processing using the Failure Mode and Effect Analysis method, it is known that of the 7 components that were damaged, the component that had the highest risk priority number value was the electronic component with an RPN value of 405.
Downloads
References
[2] Andiyanto, S., Sutrisno, A. & Punuhsingon, C. (2017). Penerapan Metode (FMEA) Failure Mode and Effect Analysis untuk Kuantitatif dan Pencegahan Risiko Akibat Terjadinya Lean Waste. Jurnal Online Poros Teknik Mesin, 6, 45-57.
[3] Ahmadi, N. & Hidayah, N.Y. (2017). Analisis Pemeliharaan Mesin Blow Mould dengan Metode RCM di PT.CCAI. Jurnal Optimasi Sistem Industri, 16, 167-176.
[4] Stamatis, D. H. (1995). Failure Mode and Effect Analysis: From Theory To Execution. ASQC Quality. Milwaukee. USA.
[5] Rausand, M and Hoyland, A (2004). System Reliability Theory Models, Statistical Methods and Applications. United States of America : John Wiley & Sons, 2004
[6] Subriadi, A.P, Najwa, N.F (2020). The consistency analysis of failure mode and effect analysis (FMEA) in information technology risk assessment. Heliyon, 6.
[7] F.-C.F. Su et al. (2020). FMEA-guided transition from microSelectron to Flexitron for HDR brachytherapy. Brachytherapy
[8] Z. Xu et al. (2019). Evaluating radiotherapy treatment delay using Failure Mode and Effects Analysis (FMEA). Radiotherapy and Oncology 137, 102-109
[9] J.F.W. Peeters et al. (2017). Improving failure analysis efficiency by combining FTA and FMEA
Downloads
Published
Issue
Section
License
In order to be accepted and published by Journal Agribest, author(s) submitting the article manuscript should complete all the review stages. By submitting the manuscript the author(s) agreed to these following terms:
- The copyright of received articles shall be assigned to Journal Agribest as the publisher of the journal. The intended copyright includes the right to publish articles in various forms (including reprints). Journal Agribest maintain the publishing rights to the published articles.
- Authors are permitted to disseminate published article by sharing the link/DOI of the article at Journal Agribest. authors are allowed to use their articles for any legal purposes deemed necessary without written permission from Journal Agribest with an acknowledgement of initial publication to this journal.
- Users/public use of this website will be licensed to Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
