Prototype Pintu Air Irigasi Otomatis Berbasis Internet Of Things

  • Erwan Darmawan Universitas Faletehan
  • Iqbal Fernando Universitas Faletehan
  • Edna Maryani Universitas Faletehan
  • Ghina Rizqandi Qurrota A'yun Universitas Faletehan
DOI: https://doi.org/10.47080/saintek.v9i1.3892
Keywords: Automatic floodgates, monitoring systems, Internet of Things (IoT)

Abstract

Abstract

A sluice gate is a supporting structure in a dam, reservoir, river, gutter or ditch which functions to regulate the control of water discharge in each flow. With good and controlled irrigation, irrigation systems and waterways from upstream to downstream can be controlled, so that the need for water in agriculture, fisheries, plantations, and industry can be met and relied on properly. The sluice gate functions to control water so that it can prevent flood water in a fast and high flow. The flowing water will lead to the river to the ocean. Therefore the author will design a prototype of an Internet of Things (IoT) based automatic sluice monitoring system.  this system requires interrelated components, namely NodeMcu as the control center of the system as well as a wifi module and the relay module as an electrical switch to turn on or off and use the blynk application.

 

References

Amalia Romana, Firda, Anshori, MohAbdullah, Junus, Mochammad, Studi Jaringan Telekomunikasi Digital, Program, Teknik Elektro, Jurusan, & Negeri Malang, Politeknik. (2021). Rancang Bangun Prototype Sistem Monitoring Pintu Air Otomatis Pengendali BanjirBerbasis Internet of Things. Jurnal Jartel), 11(1), 1–5.
Fauziah, Nurul, Munazilin, Akhlis, & Santoso, Firman. (2024). Rancang Bangun Sistem Pengontrol Irigasi Otomatis Menggunakan Mikrokontroller Arduino Uno. G-Tech: Jurnal Teknologi Terapan, 8(3), 1464–1473. https://doi.org/10.33379/gtech.v8i3.4343
Kresna A, Iqsyahiro. (2022). Perancangan Sistem Irigasi Berbasis IoT pada Sawah Padi di Kecamatan Wangon, Kabupaten Banyumas. LEDGER : Journal Informatic and Information Technology, 1(3), 1–9. https://doi.org/10.20895/ledger.v1i3.736
M, Andrew Ridow Johanis, Rotikan, Reymon, Sihotang, Jay Idoan, Adam, Stenly, A, Andryanto, Simarmata, Janner, Murpratiwi, Santi Ika, Saputra, Febri Hidayat, Hamzah, Muhammad Akram, H, Muhammad Rizal, & Sudirman. (2024). Pengantar Teknologi Digital: Web dan Mobile Teknologi.
Mambang. (2021). Buku Ajar Teknologi IoT (Internet of Things). CV Pena Persada. Retrieved from https://digilib.stiestekom.ac.id/assets/dokumen/ebook/feb_bbaff20274ab950c708e7fe2fa397c548d1a8c02_1655806709.pdf
Pratama, Rizki Candra Wahyu, Syifa, Fikra Titan, & Zen, Nur Afifah. (2023). Pengujian Sistem Dan Parameter QoS Pada Perancangan Prototipe Pintu Air Irigasi Sawah Menggunakan Aplikasi Blynk. Journal of Telecommunication, Electronics, and Control Engineering (JTECE), 5(1), 50–62. https://doi.org/10.20895/jtece.v5i1.827
Rizki Faulianur, Rouhillah, & Bariq Fajar Musaid. (2021). Prototype Buka Tutup Palang Pintu Air Bendungan Otomatis Berbasis Plc Konfigurasi Hmi. J-Innovation, 10(2), 57–62. https://doi.org/10.55600/jipa.v10i2.93
Saputra, Teddy Dwi, & Budiarso, Zuly. (2022). Rancang Bangun Sistem Pintu Air Otomatis Berbasis Iot. Joutica, 7(2), 581. https://doi.org/10.30736/informatika.v7i2.866
Suparyanto dan Rosad. (2020). Arsitektur Dan Organisasi Komputer. In Suparyanto dan Rosad (Vol. 5).
Surya, Agung, & Winardi, Slamet. (2021). RANCANG BANGUN PROTOTIPE KULKAS BERBASIS INTERNET OF THINGS (IoT). Jurnal RESISTOR (Rekayasa Sistem Komputer), 4(1), 11–17. https://doi.org/10.31598/jurnalresistor.v4i1.596
Syahir, Nasrullah, Atmajaya, Dedy, & Alwi, Erick Irawadi. (2022). Rancang Bangun Sistem Kendali Pintu Air Otomatis Pada Tambak Ikan Berbasis Sistem Kontrol. Buletin Sistem Informasi Dan Teknologi Islam, 3(1), 17–25. https://doi.org/10.33096/busiti.v3i1.1103
Published
2025-02-24
How to Cite
Darmawan, E., Fernando, I., Maryani, E., & Rizqandi Qurrota A’yun, G. (2025). Prototype Pintu Air Irigasi Otomatis Berbasis Internet Of Things. Jurnal Ilmiah Sains Dan Teknologi, 9(1), 33-41. https://doi.org/10.47080/saintek.v9i1.3892
Issue
Vol 9 No 1 (2025): Jurnal Ilmiah Sains dan Teknologi
Section
Articles

In order to be accepted and published by Journal Agribest, author(s) submitting the article manuscript should complete all the review stages. By submitting the manuscript the author(s) agreed to these following terms:

  1. The copyright of received articles shall be assigned to Journal Agribest as the publisher of the journal. The intended copyright includes the right to publish articles in various forms (including reprints). Journal Agribest maintain the publishing rights to the published articles.
  2. Authors are permitted to disseminate published article by sharing the link/DOI of the article at Journal Agribest. authors are allowed to use their articles for any legal purposes deemed necessary without written permission from Journal Agribest with an acknowledgement of initial publication to this journal.
  3. Users/public use of this website will be licensed to Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Creative Commons License