RANCANG BANGUN LAMPU OTOMATIS MENGGUNAKAN SENSOR CAHAYA BERBASIS ARDUINO DI POLRES PEMATANGSIANTAR

  • Dimas Bayu Rizki STIKOM Tunas Bangsa Pematangsiantar
  • Sumarno Sumarno STIKOM Tunas Bangsa Pematangsiantar
  • Muhammad Ridwan Lubis STIKOM Tunas Bangsa Pematangsiantar
  • Sundari Retno Andani STIKOM Tunas Bangsa Pematangsiantar
  • Ika Purnama Sari STIKOM Tunas Bangsa Pematangsiantar
DOI: https://doi.org/10.47080/saintek.v6i1.1837
Keywords: Design, Automatic Lights, Light Sensors, Arduino, Polres Pematangsiantar

Abstract

A Lights are one of the basic needs in everyday life, both in household life, offices, and others, especially at the Pematangsiantar Police Station. In line with the rapid development in the field of technology, the amount of electricity demand tends to increase rapidly. This increase in demand can be caused by the increasing number of people using electrical technology. However, there needs to be a wise attitude in the use of this lighting energy source. If the lamp is left on, it will waste electricity. This often happens because you forget to turn it off. But if it is turned off then at night it will be dark until someone turns on the light. Therefore, automation is needed in regulating the use of electrical energy in lamps. In this case, an automatic lamp design was made using an Arduino-based light sensor that can be set to turn on and off automatically according to the intensity of sunlight received so that it will suit the needs of the lamp. This automatic lamp is equipped with Arduino, LDR module, and relay. The lighting load is usually operated manually by humans, with this study, human intervention in operations can be reduced. The results of this study showed that the Arduino-based light sensor can be implemented in the design of automatic lights.

 

Keyword: Design, Automatic Lights, Light Sensors, Arduino, Polres Pematangsiantar

References

Budianto, Ramadiani, & K. (2017). Kelembaban Kandang Ayam Boiler Berbasis Mikrokontroler Atmega328. Prosiding Seminar Nasional Ilmu Komputer Dan Teknologi Informasi, 2(2), 70–73.
Faridha, M., & Yusuf Saputra, M. D. (2016). Analisa Pemakaian Daya Lampu Led Pada Rumah Tipe 36. Jurnal Teknologi Elektro, 7(3), 193–198. https://doi.org/10.22441/jte.v7i3.898
Haris, M. U. H. Y. (2017). Perancangan Sistem Kontrol Lampu Berbasis Mikrokontroler Arduino Uno R3 Dengan Sensor Suara.
Imam Marzuki. (2019). Perancangan dan Pembuatan Sistem Penyalaan Lampu Otomatis Dalam Ruangan Berbasis Arduino Menggunakan Sensor Gerak dan Sensor Cahaya. Jurnal Intake : Jurnal Penelitian Ilmu Teknik Dan Terapan, 10(1), 9–16. https://doi.org/10.48056/jintake.v10i1.48
Jaya, H., Sabran, D., Pd, M., Ma, M., Djawad, Y. A., Sc, M., Ilham, A., Ahmar, A. S., Si, S., & Sc, M. (2018). Kecerdasan Buatan. In Journal of Chemical Information and Modeling (Vol. 53, Issue 9).
Marpaung, N. (2017). Perancangan Prototype Jemuran Pintar Berbasis Arduino Uno R3 Menggunakan Sensor Ldr Dan Sensor Air. Perancangan Prototype Jemuran Pintar Berbasis Arduino Uno R3 Menggunakan Sensor Ldr Dan Sensor Air, 3(2), 71–80.
Prasetya, M. A., & Aulia, R. (2020). Prototype Penerangan Lampu Taman Otomatis Menggunakan Arduino Uno. CESS (Journal of Computer Engineering, System and Science), 5(1), 109. https://doi.org/10.24114/cess.v5i1.15889
Prastiwi, C. H. W., & Pujiawati, N. (2019). Penggabungan Artificial Intelligence dan Kecerdasan Alami dalam Pembelajaran Keterampilan Menulis Bahasa Inggris. Prosiding Seminar Nasional Pascasarjana (PROSNAMPAS), 1–7.
Pratama, W. (2020). Rancang Sistem Kunci Pintu Dengan Back-Up Baterai Berbasis Rfid Dan Arduino Uno.
Siswanto, D., & Winardi, S. (2015). Jemuran Pakaian Otomatis Menggunakan Sensor Hujan. Narodroid, 1(2), 66–73.
Published
2022-02-10
How to Cite
Rizki, D., Sumarno, S., Lubis, M., Andani, S., & Sari, I. (2022). RANCANG BANGUN LAMPU OTOMATIS MENGGUNAKAN SENSOR CAHAYA BERBASIS ARDUINO DI POLRES PEMATANGSIANTAR. Jurnal Ilmiah Sains Dan Teknologi, 6(1), 1-11. https://doi.org/10.47080/saintek.v6i1.1837
Issue
Vol 6 No 1 (2022): Jurnal Ilmiah Sains dan Teknologi
Section
Articles

In order to be accepted and published by Journal Agribest, author(s) submitting the article manuscript should complete all the review stages. By submitting the manuscript the author(s) agreed to these following terms:

  1. The copyright of received articles shall be assigned to Journal Agribest as the publisher of the journal. The intended copyright includes the right to publish articles in various forms (including reprints). Journal Agribest maintain the publishing rights to the published articles.
  2. Authors are permitted to disseminate published article by sharing the link/DOI of the article at Journal Agribest. authors are allowed to use their articles for any legal purposes deemed necessary without written permission from Journal Agribest with an acknowledgement of initial publication to this journal.
  3. Users/public use of this website will be licensed to Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Creative Commons License