RANCANG BANGUN PROTOTYPE GATEWAY MENGGUNAKAN RADIO FREQUENCY IDENTIFICATION BERBASIS ARDUINO
Abstract
Currently, a good entrance management is needed to make it easier for vehicle users to get comfort and security. Management of the gate system that is not good will cause a negative image in the eyes of users going in and out. One indicator of a good gateway system management is a smooth service process and good security. Good creation requires the support of all existing components. The gate facility is a computerized system that makes it easier for vehicle users and provides security. The gateway system using Radio Frequency Identification Digital (RFID) is able to provide both the things that users need safely and efficiently. The purpose of this final project is to realize a prototype entrance using RFID as an opener and access rights to enter and exit the parking lot. The technology used is RFID as a user ID identifier, Arduino Uno as the controller, and Microservo as the driver of the existing gate bars. The test is done by attaching the RFID card to the RFID reader. The test results show that the distance limit for RFID detected is 3 cm.
References
Habsyah, V., Christyono, Y., & Santoso, I. (n.d.). APLIKASI SISTEM PARKIR DENGAN AUTOMATISASI PEMBIAYAAN BERBASIS RFID ( RADIO FREQUENCY IDENTIFICATION ) bernama RFID tag atau transponder . Suatu RFID merespon terhadap suatu query yang dipancarkan oleh suatu RFID transceiver Sebuah sistem RFID terdiri dar. http://eprints.undip.ac.id/32008/1/Velayati_Habsyah.pdf
Hidayat, R., Pengajar, S., Teknologi, J., & Polnes, I. (2010). Teknologi Wireless RFID Untuk Perpustakaan Polnes : Suatu Peluang. Jurnal Informatika Mulawarman, 5(1).
Pala, Z., & Inanç, N. (2007). Smart parking applications using RFID technology. 2007 1st Annual RFID Eurasia. https://doi.org/10.1109/RFIDEURASIA.2007.4368108
RACHMAT, H. H., & HUTABARAT, G. A. (2014). Pemanfaatan Sistem RFID sebagai Pembatas Akses Ruangan. ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika, 2(1), 27. https://doi.org/10.26760/elkomika.v2i1.27
In order to be accepted and published by Journal Agribest, author(s) submitting the article manuscript should complete all the review stages. By submitting the manuscript the author(s) agreed to these following terms:
- The copyright of received articles shall be assigned to Journal Agribest as the publisher of the journal. The intended copyright includes the right to publish articles in various forms (including reprints). Journal Agribest maintain the publishing rights to the published articles.
- Authors are permitted to disseminate published article by sharing the link/DOI of the article at Journal Agribest. authors are allowed to use their articles for any legal purposes deemed necessary without written permission from Journal Agribest with an acknowledgement of initial publication to this journal.
- Users/public use of this website will be licensed to Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
