ANALISIS PENYABAB KERUSAKAN MESIN DENGAN MENGGUNAKAN METODE FAILURE MODE AND EFFECT ANALYSIS (FMEA) DI PT. SULFINDO ADIUSAHA
Abstract
PT Sulfindo Adiusaha is a chemical company focused on operational efficiency and quality. The main issue faced is frequent machine breakdowns, particularly mechanical seal leakage, which disrupts production processes. This study aims to analyze the causes of damage using the Failure Mode and Effect Analysis (FMEA) method to determine repair priorities. The analysis results show that mechanical seal leakage has the highest Risk Priority Number (RPN) of 504, making it the top repair priority. The main causes of damage include human factors, maintenance methods, materials, and machine wear. Recommendations for improvement include operator training, replacing components with heat-resistant materials, and structured periodic maintenance. These steps are expected to enhance productivity and reduce downtime risks.
References
Amalia, W., Ramadian, D., & Hidayat, S. N. (2022). Analisis Kerusakan Mesin Sterilizer Pabrik Kelapa Sawit Menggunakan Failure Modes and Effect Analysis (FMEA). Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 8(2), 369. https://doi.org/10.24014/jti.v8i2.19179
Anastasya, A., & Yuamita, F. (2022). Pengendalian Kualitas Pada Produksi Air Minum Dalam Kemasan Botol 330 ml Menggunakan Metode Failure Mode Effect Analysis (FMEA) di PDAM Tirta Sembada. Jurnal Teknologi Dan Manajemen Industri Terapan, 1(I), 15–21. https://doi.org/10.55826/tmit.v1ii.4
Anthony, M. B. (2018). Analisis Penyebab Kerusakan Hot Rooler Table dengan Menggunakan Metode Failure Mode And Effect Analysis (FMEA). Jurnal INTECH Teknik Industri Universitas Serang Raya, 4(1), 1. https://doi.org/10.30656/intech.v4i1.851
De Fretes, R. (2022). Analisis Penyebab Kerusakan Transformator Menggunakan Metode Rca (Fishbone Diagram and 5-Why Analysis) Di Pt. Pln (Persero) Kantor Pelayanan Kiandarat. Arika, 16(2), 117–124. https://doi.org/10.30598/arika.2022.16.2.117
Hamdani, D. (2022). Pengendalian Kualitas Dengan Menggunakan Metode Seven Tools Pada PT X. Jurnal Ekonomi, Manajemen Dan Perbankan (Journal of Economics, Management and Banking), 6(3), 139. https://doi.org/10.35384/jemp.v6i3.237
Haryanto, E. (2019). Analisis Pengendalian Kualitas Produk Bos Rotor Pada Proses Mesin Cnc Lathe Dengan Metode Seven Tools. Jurnal Teknik, 8(1). https://doi.org/10.31000/jt.v8i1.1595
Kuncoro, D. K. R., Pratiwi, P. A. N., & Sukmono, Y. (2018). Pengendalian Risiko Proses Produksi Crude Palm Oil Dengan Metode Failure Mode And Effect Analysis (Fmea) dan Fault Tree Analysis (FTA). Jurnal Ilmiah Teknik Industri, 1(1), 01–06.
Rachman Khadafi, W. (2021). Rancang Bangin Aplikasi Check Sheet Preventive Maintenance Plant BCHI Menggunakan Progressive Web Application. Jurnal Instrumentasi Dan Teknologi Informatika (JITI), 2(2), 2746–7635.
Wicaksono, Aldi, Dhartikasari Priyana, E., & Pandu Nugroho, Y. (2023). Analisis Pengendalian Kualitas Menggunakan Metode Failure Mode and Effects Analysis (FMEA) Pada Pompa Sentrifugal Di PT. X. Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 9(1), 177. https://doi.org/10.24014/jti.v9i1.22233
Wicaksono, Arif wicaksono, & Yuamita, F. (2022). Pengendalian Kualitas Produksi Sarden Mengunakan Metode Failure Mode and Effect Analysis (FMEA) Untuk Meminimumkan Cacat Kaleng Di PT. Maya Food Industries. Jurnal Teknologi Dan Manajemen Industri Terapan, 1(I), 1–6. https://doi.org/10.55826/tmit.v1ii.6
Wirawan, E., & Minto. (2021). Penerapan Metode PDCA dan 5 Why Analysis pada WTP Section di PT Kebun Tebu Mas. Jurnal Penelitian Bidang Inovasi & Pengelolaan Industri, 1(01), 1–10. https://doi.org/10.33752/invantri.v1i01.1825
Copyright (c) 2025 Salsabila Safitri, Aulia Kusumawati, Levi Amanda Putra
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
