ANALISIS PERSEDIAAN BAHAN BAKU PASIR PADA PRODUK BETON MENGGUNAKAN METODE EOQ DAN POQ DI PT XYZ
Abstract
Ordering raw materials optimally can provide benefits for the company. PT. XYZ places an order for sand 12 (twelve) times in 1 (one) period which causes it to be ineffective and inefficient. Therefore, it is necessary to have a method that is able to control the total cost of raw material inventory in order to ensure a smooth production process. The EOQ (Economic Order Quantity) method is used to identify orders to minimize the total cost of holding inventory, purchase raw materials with each purchase with a minimum cost, and orders that minimize total inventory costs. Thus the EOQ (Economic Order Quantity) method can save the cost of raw material inventory which is able to make a company profitable by applying this method. The results of this study indicate that the EOQ (Economic Order Quantity) method can save raw material inventory costs compared to traditional methods (policy firms). The savings in the cost of raw materials for sand in the EOQ (Economic Order Quantity) method were Rp.8.394.400.
References
Kuncoro, Deasy Kartika Rahayu, Putri Ayu Navy Pratiwi, and Yudi Sukmono. 2018. “Pengendalian Risiko Proses Produksi Crude Palm Oil Dengan Metode Failure Mode And Effect Analysis (Fmea) Dan Fault Tree Analysis (FTA).” Jurnal Ilmiah Teknik Industri 1(1): 01–06.
Syarifudin, Achmad, and Jeki Tri Putra. 2021. “Analisa Risiko Kegagalan Komponen Pada Excavator Komatsu 150LC Dengan Metode FTA DAN FMEA DI PT. XY.” Jurnal InTent 4(2): 1–10.
Yaqin, Rizqi Ilmal et al. 2022. “Analisis Komponen Kritis Mesin Bubut Underfloor Menggunakan Metode Failure Mode and Effect Analysis Dan Fault Tree Analysis.” Jurnal Sains, Teknologi dan Industri 8(2): 174–83.
Hesti, Luthfia Putri, and Asep Erik Nugraha. 2023. “Analisis Komponen Kritis Mesin Bubut Underfloor Menggunakan Metode Failure Mode and Effect Analysis Dan Fault Tree Analysis.” Jurnal Serambi Engineering 8(3): 6132–38.
Suliantoro, Hery, Arfan Bakhtiar, and Joy Irfan Sembiring. 2018. “Analisis Penyebab Kecacatan Dengan Menggunkan Metode Failure Mode and Effect Analysis (Fmea) Dan Metode Fault Tree Analysis (Fta) Di Pt. Alam Daya Sakti Semarang.” Jurnal Ilmiah Teknik Industri 6(2): 95–170.
Ansori, Nachnul, and M Imron Mustajib. 2013. “Sistem Perawatan Terpadu.” Yogyakarta: Graha Ilmu.
Yaqin, Rizqi Ilmal et al. 2022. “Studi Perawatan Berbasis Risiko Sistem Pelumasan Mesin Induk KM Mabrur Dengan Pendekatan FMEA.” Jurnal Sains, Teknologi dan Industri 19(2): 218–26.
Muhdor, Hamid Abdillah, and Mouhamad Sidik. 2023. “Analisa Pemeliharaan Mesin Bubut Dengan Fault Tree Analysis (FTA) Dan Failure Mode and Effect Anaysis (FMEA) Di CV . Maja Teknik Pandeglang.” Jurnal of Vocational Education and Automotive Technology Vol. 5(No. 2): 174–83.
Amalia, Wahyuni, Demi Ramadian, and Syarif Nur Hidayat. 2022. “Analisis Kerusakan Mesin Sterilizer Pabrik Kelapa Sawit Menggunakan Failure Modes and Effect Analysis (FMEA).” Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri 8(2): 369.
Jay, Heizer, and Render Barry. 2011. Jakarta : Salemba Empat Operations Management (Manajemen Operasi).
Susilo, Aryudi, R Ismet Rohimat, and Hennie Husniah. 2020. “Analisis Kegagalan Operasional Mesin Chiller Dengan Metoda FTA Dan FMEA.” Integrasi : Jurnal Ilmiah Teknik Industri 4(2): 19.
Daryus, A. 2007. “Manajemen Pemeliharaan Mesin.” Jakarta.
Andriyanto, Achmad, and Yuniar Ega Anggraini Putri. 2021. “Analisis Penyebab Kegagalan Pengiriman Barang Project 247 Atau Jenis Sxq Pada Divisi Operation Airfreight Pt.Cipta Krida Bahari Dengan Metode Failure Mode and Effect Analysis (Fmea) Dan Fault Tree Analysis (Fta).” Jurnal Logistik Bisnis 11(1): 7–13.
Supono, Joko. 2018. “Analisis Penyebab Kecacatan Produk Sepatu Terrex Ax2 Goretex Dengan Menggunakan Metode Fault Tree Analysis (Fta) Dan Failure Mode and Effect Analysis (Fmea) Di Pt.Panarub Industri.” Journal Industrial Manufacturing 3(1): 15–22.
Hernadi, M A R, and S T Much Djunaidi. 2022. “Analisis Faktor Kerusakan Mesin CNC Thermoforming T10 Dan Mesin CNC Milling FZ2000 Dengan Menggunakan Metode Failure Mode and Effect Analysis (FMEA) Dan Fault Tree Analysis (FTA).”
Sidik, Jakpar, Winny Andalia, and Tolu Tamalika. 2023. “Identifikasi Perawatan Mesin Press Hidrolik Dengan Menggunakan Metode FMEA Dan FTA (Studi Kasus Di Bengkel Cahaya Ilahi).” Jambura Industrial Review (JIREV) 2(2): 57–64.
Copyright (c) 2024 Sopadi Sopadi; Tarman Tarman, Tarman, sandi Yudha Haris, Haris
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.