PENERAPAN METODE CERTAINTY FACTOR UNTUK MENGIDENTIFIKASI PENYEBAB CACAT PADA PRODUK PLASTIC INJECTION MOLDING DI PT TENMA CIKARANG INDONESIA

Fairujah Fairujah; Eko Martantoh

doi:10.47080/iftech.v5i2.2713

Fairujah Fairujah Universitas Panca Sakti Bekasi
Eko Martantoh

DOI: https://doi.org/10.47080/iftech.v5i2.2713

Keywords: expert system, certainty factor, product defects, plastic injection molding

Abstract

This study aims to develop and implement an expert system with the certainty factor method to identify the causes of defects in products produced by plastic injection molding machines at PT Tenma Cikarang Indonesia. This research begins by analyzing data on product defects recorded over a certain period to identify patterns of defects that frequently occur. Furthermore, an analysis of the factors that influence the occurrence of defects in plastic injection molding products is carried out. The certainty factor method was chosen as the basis for developing this expert system because this method is able to combine expert knowledge in the form of rules with the level of certainty for each of these parties. The process of developing this expert system involves the stages of modeling rules based on expert knowledge related to the causes of defects in plastic injection molding products. Furthermore, the implementation of these rules is carried out to calculate the level of certainty or certainty factor. The results of this study indicate that the developed expert system is successful in identifying the causes of defects in plastic injection molding products with a high degree of accuracy. This system can provide recommendations for appropriate corrective actions to address the type of identified defects. It is hoped that the application of this expert system at PT Tenma Cikarang Indonesia can increase production efficiency, reduce the number of product defects, and improve the quality of the products produced.

Keyword: expert system, certainty factor, product defects, plastic injection molding

References

Fahrizal., Fauzi, A., Maulana, A., Wardani, S. Y. C. (2021). Sistem Pakar Pendeteksi Kerusakan Pada Hardware Komputer Berbasis Android.

Cahyadi, D., & Al Huda, M. (2018). Analisis Pengendalian Cacat Produk pada Proses Plastic Injection Moulding dengan Material Polyprophylene. TEKNOBIZ: Jurnal Ilmiah Program Studi Magister Teknik Mesin , 1 (2), 79-87.

Kesuma, M., Fitria, D., & Albab Al Umar, A. U. (2021). Pengaruh Harga, Kualitas Produk, dan Promosi Terhadap Keputusan Pembelian Produk Pattaya Corner Kota Salatiga. Jurnal Ilmiah Manajemen Ubhara, 3(1), 13-21.

Lowrenza, D. (2022). Identifikasi Kegagalan Faktor Hasil Produksi Busa dengan Sistem Pakar Metode Dempster Shafer dan Certainty Factor. Jurnal Informatika Ekonomi Bisnis , 7-16.

Nasution, T. I. S., & Kurniawati, T. (2019). Pengaruh Kualitas Produk dan Kualitas Pelayanan Terhadap Kepuasan Konsumen Produk Nissan Grand Livina. Jurnal Ecogen , 1 (4), 880-886.

Novianti, K. D. P., Jendra, K. Y. D., & Wibawa, M. S. (2021). Diagnosis Penyakit Paru Pada Perokok Pasif Menggunakan Metode Certainty Factor. INSERT: Information System and Emerging Technology Journal, 2(1), 25-34.

Novita, S., Aspriyono, H., & Elfianty, L. (2023). Sistem Pakar Identifikasi Penyakit Hipertensi Pada Ibu Hamil Menggunakan Metode Certainty Factor. JUKI: Jurnal Komputer dan Informatika, 5(1), 43-51.

Prebiana, K. D., & Astuti, L. G. (2020). Penerapan Metode Certainty Factor (CF) Dalam Pembuatan Sistem Pakar Diagnosis Penyakit Tumor Otak. Jurnal Elektronik Ilmu Komputer Udayana p-ISSN, 2301, 5373.

Rusito., & Putra, T. W. A. (2022). Perancangan Sistem Pakar Untuk Mendeteksi Kerusakan Komputer Dengan Metode Certainty Factor. JURNAL TEKNOLOGI INFORMASI DAN KOMUNIKASI, 13(1), 70-81.

Widiastuti, H., Surbakti, S. E., Restu, F., Albana, M. H., & Saputra, I. (2019). Identifikasi cacat produk dan kerusakan mold pada proses plastic injection molding. Jurnal Teknologi Dan Riset Terapan (Jatra), 1(2), 76-80.